Latest gear end Tenders | Government gear end Tenders

Central Government/Public Sector

CTN :44815777

17 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For corrigendum : auction sale of rolling stock - condemned bg wag-5ha ac loco no. 23480 with all available ferrous -non ferrous-wooden fittings- excluding the following reclaimable items- (1) wheel set with bull gear(hitachi), msu and wheel disc- 6 sets (2) axle box housing with ferrous components-12 nos. (3) cbc assembly with yoke, draft gear and shank- 2 nos removed items- (1) battery-10 nos (2) line contactor-4 nos (3)loco side buffer-4 nos (4) transformer with conservator-1 no (5) tap changer with smgr-1 no. loco no- 23480 wag-5ha. ds8 no. 022822-25-22474 of 05.02.2026 location- els/ajj cus- sse-els-ajj. pl.no. 98980889. note- (1) rc items to be handed over to custodian at specified location before final delivery.(2) cutting permitted to loadable size only. (3) crane/jcb loading permitted.(4) purchaser should take safety precaution while cutting of loco.(5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by purchaser from railway premises and should be disposed as per the existing norms of central/state government.

Central Government/Public Sector

CTN :44815781

17 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For corrigendum : auction sale of depot ferrous scrap - cond. and u/s melting scrap such as cond. end shield, anchors, connecting rod, elbow, fiisher plate, pinion gears, centre pivot, bss hanger, narrow jaw adapter, screw coupling, tie bar, draw bar hook, welding test in full/cut/single/fabricated pieces, push rod, lever, cut parts of cattle guard, end shield, stator w/o coil, knuckle, adapter, axle guide, cut brake beam, brake wheel lever, side pillar, anti falling atd rod, pull rod, shaft, toothed segment, tamping tool, racer,chucks, air brake components, wagon/coach cut up parts, supporting plate, cbc pin,cbc, bogie frame cut ups, sleeves, brake head with/without brake block attachments, adjustable pull rod & safety chain, slack adjuster, crow bar, adapter, angle, channel, plate, rod, different types of cocks, pipe, rings, brake anchor, anchor block, buckle, box, pin, rivet, bolt, back bush, anvil smith, pedal switch & base, stay plate, inner & outer rings of bearing, connecting rod, brake gear components, screw coupling,spring holder plate assembly, crank shaft assembly, cylinder linear centering disc, double hook chain, chain of various sorts and sizes, alternator end shield, modified hanger, weighing machine weights, test bar & hardness table, parking brake link, axle box inner cover, tension rod, tensioning rod gauge plate, pin punches, pinch bar, nut, wide jaw adapter, narrow jaw adapter, top housing, door chainless cotter, cc pad, control rod, fabricated side, cut off angle cock and all released m.s. components of rolling stock/carriage/wagon/loco. all the above items are of all sorts, shapes and sizes in full/broken/cut/dismantled in as is where is condition. pl.no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) during delivery if any major non-ferrous items found the same may be handed over to custodian. 2) cutting permitted for heavy nature items only. 3)loading permitted by crane / jcb. location: bin j

Central Government And Public Sector

CTN :44803057

29 Apr, 2026 NA

Surat - Gujarat

Tender For supply of turbine governing system d d - hp so unit complete assembly as per bhel drawing no. g2613888_item 1 to 58 , lp so unit complete assembly as per bhel drawing no. g2613898_item 1 to 58 , acceleration governor assembly as per bhel drawing no. g2613911 item no. 1 to 3, 5 to 7, 9 to 13 and 15 to 31_without gear , assembly of hpsop relief valves as per bhel g261389 _item 1 to 10 , assembly of lpsop relief valves as per bhel drawing no. g2613892_item 1 to 10 , 7 inch vertical governor assembly as per drawing no. g2613904_calibrated and tested , hp governor valve relay gear power cylinder assembly as per bhel drawing no. g2613887 consisting of item 1 to 11 and 13 to 72 , safety governor stub shaft as per bhel drawing no. g2613909 assembled with oil tripped safety governor as per bhel drawing no. g2613908 , valve spindle and rivet assembly for hp governor as per bhel drawing no. g2613886 item 9, 13 and 14_sub assembly supply , hp governor valve relay gear cam as per bhel drawing no. g2613887_item 9. , hp governor valve relay gear cam roller as per bhel drawing no. g2613888_item 27 , dump valve of lp governor valve sleeve, valve, valve seat, spring and orifice as per bhel drawing no. f2701489 item no. 3, 4, 5, 6 and 16_loose supply , dump valve of lpev sleeve, valve, valve seat, spring and orifice as per bhel drawing no. f2701488 item no. 3, 4, 5 and 6_loose supply , turbine governing system worm wheel_item no. 2_as per bhel drawing no. g2612888_loose supply , hp pilot valve body as per bhel drawing no. g2613906_item 01 , lp pilot valve body as per bhel drawing no. g2613906_item 02 , impulse unit isolating valve as per bhel drawing no. f2702004_item 1 to 6. ) /bid number : gem/2026/b/7379492 * /dated: 08-04-2026 & & / bid document 1 / 26

Central Government / Public Sector

CTN :44815691

15 Apr, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of rolling stock - lot no 31326030120 1)98110159 (01) (hsn code: 72044900 - gst 18% on fcm basis) scrapof cond. & u/s. 8 wheeler wagons, bcn m1 boxnr , bobrn m1 .available on rails. 1) er bcn m1 30029060266,2) scr bcn m1 30099082380 ,3) er bcn m1 30028860355 ,4) ser boxnr 25079662164 ,5) er bobrn m1 72029681010 . location road no.1 . at dump yard. rc items: 1.coupler bodies (nt), 2, yokes 3. knuckles , 4.draft gears, 5.striker castings (nt), 6. centre pivots 7. casnub bogies with out all fittings with wheel sets, 8. casnub bogies with all fittings, 9. distributor valve,, 10 .sab 11.yoke pin support (1st plate),12. safety plate with anchor plate (2n d plate 13. yoke support plate(3rdplate),14.cut of angle cock,15.yoke pin,16)draft gear followers,17.knuckle pin.18.knuckle thrower.19.back stopper.20.bcn flap,21.bronze buishes ds8no:0999603120. dt:.17.03.26. note to purchaser : before delivery of wagon cut off parts, the declared. rc items need to be handed over by the purchaser to sse/scrap at shop floor by transporting through purchaser¿s vehicle/labor approx weight: 64.728 .mt (m.s -60.542, ss-4.186) sold by number basis only. delivery in cut of parts on lot basis only. note:-if any non ferrous items found in cutting/delivery, purchaser should be handed over to railways. 05 nos.

CTN :44794231

17 Apr, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For tender for supply of plastic dust cover sheet 4.5 ft 25 kg , safety head gear , spin mop hard plastic auto , wooden center table 4 x 2 ft , office brief case , induction cooktop commercial , rectangular mat 18 mm anti slip

Central Government/Public Sector

CTN :44800874

16 Apr, 2026 NA

Hospet - Karnataka

Tender For supply of safety lock for uncoupling gear arrangement of wagons to drg. no. j&td/cw/per/sk-1485. material and specification as per drawing. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44609161

14 Apr, 2026 NA

Vadodara - Gujarat

Tender For corrigendum : procurement of m/s roto pumps ltd make spares - gland, pn-14, pump, complete unit with motor, safety relief valve assembly, screw with timing gear driven screw,p/n-27,moc: aisi 420 - 1 no key for timing gear - 2 nos timing gear,p/n-31,moc: en 36 - 2 nos driving screw,p/n-26,moc: aisi 420 - 1 no, stuffing box,p/n-2

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Central Government/Public Sector

CTN :44769536

17 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)cr bcnm1 30019261000 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 2)cr boxnm1 10019600252 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 3)sr boxnm1 10069645319 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 4)sc boxnr 25099760826 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 5)sc boxnr 25099760284 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 6)sc boxnm1 10099660733 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 7)cr boxnm1 10019860229 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke vn side only, 4.yoke pin, and 5.side bearer top plate = 7 wagons. ds8 no:023310-25-24115 dt: 27.02.2026. pl.no. 98110159, location: jtj yard. custodian: sse - c and w - jtj. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government. (6) wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside.

Gear End Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector